Showing : 101 SIME FRIENDLY FORMAT TECHNYL Parts.
BALL COCK 1/2 x 15 COLD WATER INLET
BALL COCK 3/4 x 22 FLOW / RETURN VALVE
BRACKET DIVERTER VALVE MICROSWITCH SUPPORT
CABLE CONNECTOR 11 POLE FEMALE
CABLE CONNECTOR 2 POLE FEMALE
CABLE CONNECTOR 6 POLE FEMALE STOCKO
CABLE CONNECTOR 6 POLE FEMALE STOCKO
CABLE CONNECTOR TEMPERATURE SENSOR
CASING LEFT HAND SIDE PANEL OUTER CASE
COMBUSTION CHAMBER FRONT PANEL INNER CASE
COMBUSTION CHAMBER LEFT OR RIGHT HAND SIDE PANEL INNER CASE
COMBUSTION CHAMBER REAR PANEL INNER CASE
CONTROL BOX SIT 537 IGNITION
CONTROL PANEL COMPLETE CONTROLS CASE
CONTROL PANEL FRONT OF CONTROL CASE ONLY
CONTROL PANEL REAR COVER FOR CONTROL BOX
CONVERSION KIT LPG TO NAT GAS 25-30 kW
CONVERSION KIT NAT GAS TO LPG
ELBOW 1/2 x 15mm HOT WATER OUTLET
EXPANSION VESSEL 7 LITRE 1/2 in M
FASTENER FOR SELF TAPPING SCREW OUTER CASING CLIP
FIXING SPRING TEMPERATURE SENSOR
FLUE RING FAN OUTLET EXTENSION SILICON RUBBER
FRAME EXPANSION VESSEL LOWER SUPPORT BRACKET
FRAME LOWER CLOSING PANEL BOTTOM OF BOILER
FRAME WALL FRAME LOWER ASSEMBLY
FRAME WALL FRAME UPPER SUPPORT
GASKET 12.5MM X 18.5MM X 3MM
HEAT EXCHANGER PRIMARY PR20326001
INJECTOR MAIN BURNER NP 130 NAT GAS M6
INJECTOR MAIN BURNER NP 75 LPG M6
INSULATION FRONT COMBUSTION CHAMBER
INSULATION REAR COMBUSTION CHAMBER
INSULATION SIDE COMBUSTION CHAMBER
KNOB Ø 40 SELECTOR & TEMPERATURE
LOCKING NUT FOR 15MM PIPE PRV OUTLET
MICROSWITCH FLOWMETER / FLOWSWITCH
NUT 1/2 FOR EXPANSION VESSEL
O-RING 117 X 13.1 X 2.62 EP851
O-RING 3068 FLOW / RETURN PIPES
O-RING DALMAR R12 D.H.W. HEAT EX
O-RING KIT FOR HYDRAULIC GROUP
O-RING Ø 75,87 x 2,62 EP851 PUMP HEAD
O-RING WASHER Ø 56,3x60 FAN OUTLET
PIPE CONNECTS D.H.W. HEAT EX TO EXPANSION VESSEL
PIPE CONNECTS GAS VALVE TO MAIN BURNER
PIPE SAFETY VALVE OUTLET DRAIN
PLASTIC CAP ANALYSER PLUG
PLATE HEAT EXCHANGER KIT 12 PLATES
PRESSURE RELIEF VALVE 1/2 3 BAR
PUMP CP53MH MYSON MOTOR HEAD ONLY
SCREW SELF TAPPING T.C.B. 8SPx3/4
SCREW T.C.B. M4x10 AISI 304
SEALED CHAMBER FRONT PANEL INNER CASE
SEALED CHAMBER REAR PANEL INNER CASE
SEALED CHAMBER SIDE PANEL INNER CASE
SMOKE CHAMBER HEAT EX TOP COVER INNER CASE
SPLIT PIN KIT FOR HYDRAULIC GROUP
SPRING CLIP HEAT EXCHANGER TO PIPES
STRAIGHT FITTING 1/2 in MANIFOLD TO ISOLATION VALVE NIPPLE
STRAIGHT FITTING 3/4 in MANIFOLD TO ISOLATION VALVE NIPPLE
THERMOSTAT OVERHEAT 100°C SAFETY STAT
TRIMMER SPINDLE POTENTIOMETER Ø 5
TRIMMER SPINDLE POTENTIOMETER Ø 6
WASHER COPPER Ø 6 FOR BURNER INJECTOR
WASHER GASKET Ø 17x24x2 3/4
WASHER Ø 21x37 BURNER MANIFOLD