Showing : 159 HEATLINE MONZA 28A Parts.
3-WAY VALVE BOTTOM BRASS CONNECTION
3-WAY VALVE UPPER PASTIC BLOCK
BOTTOM CONCOLE - HYDROBLOCK
BOTTOM CONSOLE SEALING FOAM REAR
BY PASS GROUP - REVISION 01
CLIP - 3 WAY VALVE MOTOR (PK 10)
CLIP - PUMP / HEAT EXCHANGER (PK 10)
CLIP - PUMP/FLOW SENSOR HOUSING (PK 10)
CONDENSATION CONNECTION - PLASTIC
CONDENSE HOSE (BOTT CONNECTION TO TRAP)
CONNECTION - FLUE TERMINAL
CONNECTOR - MAINS BOARD CONNECTOR
CONTROL PANEL SEALING FOAM
CONTROL PANEL SEALING FOAM
DIVERTER VALVE MOTOR ONLY
EXPANSION VESSEL - 8 LITRE
EXPANSION VESSEL FIXING PLATE
FILTER PREMIX FILTER GROUP
FLEXIBLE PIPE SET, EXPANSION VESSEL
FLOW RESTRICTOR - 10LTR (PK10)
FLUE GAS CAP (TEST POINT)
GASKET - HEAT EXCH. OUTLET/GAS (PK10)
GASKET -HEAT EXCHANGER OUTLET PIPE(PK10)
HEAT EXCHANGER,NEVA CON. 12 PLATES, PFJ
HOSE, SIPHON NC EXCHANGER
INSULATION, 16 MM WITH NUT AND WASHER
JUBILEE CLIP (10 - 16) TORRO 10-16/971
JUBILEE CLIP (12 - 23) (PK10)
O-RING - 17.17 X 1.78 (PK10)
O-RING - 17.86X2.62 (PK10)
O-RING - 17.86X2.62 (PK10)
O-RING - 18.64X3.53 (PK10)
O-RING - 23.47X 2.62 (PK10)
O-RING - CONDENSING TRAP (PK10)
O-RING (PUMP ASSEMBLY & COND UNIT) PK 10
O-RING, D3.60X18.30 E (PK10)
O-RING, HEAT EXCHANGER (PK10)
PRESSURE RELIEF VALVE - 3 BAR
PRESSURE SENSOR CLIP (PK10)
PROTECTION PLATE (BIRD PROTECTION)
SEALING RING (133 X 161.5)
SHEETSCREW 4.8X13 T20 (PK10)
SPONGE - PUMP STEP (PK10)
USER INTERFACE PCB - WITH KEYPAD
WALL SEAL (INSIDE - DN 100)
WALL SEAL (OUTSIDE - DN 100)
WASHER FOR FLEX HOSE/H-EXCHANGER PK 10
Instagram
Twitter
