Showing : 143 GLOWWORM BETACOM 24 A Parts.
CAP, AIR TEST POINT EPDM (DN 14) - (HORIZONTAL & TELESCOPIC FLUE KIT)
CLAMP (100 X 48) - (HORIZONTAL TOP OUTLET TELESCOPIC AIR/FLUE DUCT)
CLAMP, 9 MM (90-110) - (HORIZONTAL REAR TELESCOPIC FLUE SYSTEM)
CLIP DOMESTIC HOT WATER SENSOR (PK10)
COMPRESSION FITTING (PK10)
DIVERTER VALVE MOTOR 3WV ELBI
FLANGE, GAS VALVE CONNECTOR
INSIDE WALL SEAL (DN 100)
INSULATION, 16 MM WITH NUT AND WASHER
INTERNAL WALL SEAL (102-165)
NTC WITH CLIP D=18MM 10K OHM
O-RING EPDM (DN 60) - (DEFLECTOR-KIT FOR HORIZONTAL AIR/FLUE DUCT BLACK)
O-RING HEAT EX / PIPE (PK10)
OUTSIDE TERMINAL (OPENING)
OUTSIDE WALL SEAL (DN 100)
OUTSIDE WALL SEAL BLACK (100-165)
PACKING RING EPDM (133 X 161.5)
PACKING RING EPDM (DN 60)
PIPE SUPPORT CLIP (DN 60)
PIPE SUPPORT CLIP BLACK (DN 60)
PIPEWORK - EXPANSION VESSEL
PIPEWORK - HEATING RETURN
PLASTIC CONTROL BOX COVER
ROSETTE, OUTSIDE 100-165 (BLACK) - (DEFLECTOR-KIT FOR HORIZONTAL AIR/FLUE DUCT BLACK)
SANITARY WASHER 1/2 PK 50
SCREW M5X20 H/E PLATE (PK25)
SEALING RING FLAT 30 X 20 X 2.1 PUMP (PK20)
TAP - ISOLATION, COLD WATER
TUBE-PRESSURE RELIEF VALVE
WALL CONNECTOR BLACK (OPENING)
WALL SEAL OUTSIDE 100-165
WIRE RETAINING CLIP (PK10)